| After-sales Service: | Provide |
|---|---|
| Warranty: | 1year |
| Type: | Sp-P88 |
| Material: | Stainless Steel |
| Position: | 8+8 |
| Automaticity: | Full Automatic |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
01
Full-automatic Profiling
The whole line is fully automatic production, including the feeding of the incoming sheet, the transition between the slotting machines and the finished products
02
High speed/High capacity
The longitudinal no-load speed of high-speed production line can reach 90m/min, while the current conventional production line speed is only 50-70m/min.
03
High stability & Low defective rate
High precision tool shaft and cutting tools are used inside the equipment to ensure stable production and reduce the rate of defective products.
04
Thorough dust control
Slotting equipment is sealed with a fully closed enclosure, and the dust control rate can reach more than 95%
| Sawing Machine +Profiling Machine | |
| Processing Length | 600~2450mm |
| Processing Width | 970~1300mm |
| Thickness | 3.0~10.0mm |
| After cutting | Length(600~1850mm)×Width (110~475mm) |
| After processing lock | Length(600~1850mm)×Width (100~475mm) |
| Feed Drive Unit | 3.7kW×4P 1 unit Inverter Control |
| Feeding Speed | 8 ~40m/min ( With the increase of thickness and Slice number, feed rate decreasing) |
| Caterpillar Chain | N75 type Chain×2 |
| Caterpillar Chain Guide | N75 resin type |
| Main Spindle | 22kW×2P 1 unit 3000rpm |
| Profiling Machine | |
| Vertical Slotting Machine | 2.2kW×4P 1 unit Inverter Control,Installed on the Left. 20~90m/min,Ring Belt |
| Vertical Double End Milling | |
| Rack Truck | Left fixed, right mobile side Installation Liner Guide,Digital, 1.1kw×4P, 1 unit |
| Feed Drive Unit | Right mobile side Installation,7.5kW×4P Inverter Control 1 unit 20 ~90m/min(Normal 60m/min) |
| Caterpillar Chain | N30 type Chain,2 Column with Urethane Plates(Flat type) |
| Caterpillar Chain Guide | N30 ceramic type |
| Air Blow for Chain | Right/Left & Inlet/Outlet, Total 4 points |
| Lubrication Pump | For Caterpillar Chain Guide, Auto-Lubrication type 25W 1 unit,For Traveling Drive Sleeve & Column Screw. |
| Up Pressing Device | Vapour-pressure type belt pressing |
| Spindle Movement | Manual type Mechanical digital position indicator |
| Automation Loading system | |
| OperationControl system | 1. PLC program controller: Siemens2.Touch Screen: Siemens3.Frequency converter:Siemens |
| Servo system | Servo motor: SiemensUsing the operating system developed by ourselves, the logic program is rigorous and reasonable. |
| Sensor system | 1. Photoelectric switch: SICK2. Proximity Switch: SICK3. Magnetic Switch: SMC |
| Electrical control system | 1. All tests and protection shall adopt double safety protection measures.2. Contactor, intermediate relay: Mitsubishi,Chint Group3. Drag chain cable: GB high-speed flexible sports cable (North American UL standard) |
| Pneumatic control system | Vacuum System: Pineb2. Oil-water separator: SMC full pressure automatic drainage type3. Vacuum sucker: self-developed silicone sucker |
| Mechanical shifting parameters | Sheet length: 800~1550 mmSheet width: 800-1250mmSingle weight: maximum 30 KGSinglethickness: 3-8mmMaximumStacking height: 800mm |
| Input gas source | Stable air pressure 0.6-0.8Mpa |
| Working voltage | Three phase 380 V, 50 Hz, single phase 220 V, 50 Hz |
| Working height | According to the working height of the main engine on site. (900-1250mm) |
| OperationControl system | 1. PLC program controller: Siemens2.Touch Screen: Siemens3.Frequency converter:Siemens |
| Servo system | Servo motor: SiemensUsing the operating system developed by ourselves, the logic program is rigorous and reasonable. |
| Sensor system | 1. Photoelectric switch: SICK2. Proximity Switch: SICK3. Magnetic Switch: SMC |
Q1: What you can offer to your customers?
A: We can provide our customers with professional equipment and excellent design and perfect service to ensure their smooth production.
Q2: How long is your delivery time?
A: 5-20days after order confirmed.Based on the item and quantity.
Q3: What's the MOQ?
A: 1 set.
Q4: Can you produce according to customers' design?
A: SureWeare professional manufacturerOEM AND ODM are both welcome.
Q5: Why should I choose your company?
A: We can provide our customers with high auality and high safety products.
We have a team of experienced skilled workers and engineers.
We can support overseas support.
We can customize the design.
We can provide after-sales service for our customers.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}